Leather N°0

Full grain natural leather gross with mineral tanning followed by light oil food. This dry leather provides strong friction coefficient on the edge of the leather. And offers mechanical properties superior to the conventional leathers. This leather can also be stretched on customer request to improve its properties. Friction, traction and resistance to wear are its key words.
  • Thickness - 4-4.5 mm
  • Skin Area - Crop
  • Use example - Friction Belt and Friction Leather
Technical specifications

Leather n°1

Natural full grain leather gross with mineral tanning followed by intense oil food. It is conceived to combine resistance and malleability and is dedicated to molded parts. This mineral leather will perfectly match the metal tools, fit closely to their evolutions in time while resisting to strong mechanical and thermal stresses. Leather ideal for seals.
  • Thickness - 4-4.5 mm
  • Skin Area - Crop
  • Use example - Seals and Molded sealing part
Technical specifications

Leather N°9

Leather N ° 9 is a natural full grain leather, from beef and bull, mineral tanned and oil fed. It offers a good balance of cutting, strength and durability. It finds its place for any use of protection against the external projections, the abrasion, the friction or even the shocks. It is a low-fed leather that also offers good adhesion associated with a fastness to rubbing for industrial uses.
  • Thickness - 3-3.5 mm
  • Skin Area - ½ HIDE / FULL HIDE
  • Use example - Gusset vents, Industrial protection, Individual protections
Technical specifications

Leather N°10

Full grain leather combining robustness and aesthetics. It has one of the most important tensile strengths and keeps a coating solidity. After mineral tanning, its immersion in a bath of grease protects it from disturbances in outside environment and from variation in temperatures. It is the ideal partner for outdoor uses. On demand, this leather is stretched to minimise the stretch under load.
  • Thickness - 3-5 mm
  • Skin Area - ½ Crop, ½ back, Crop, neck
  • Use example - Seal, Molded leather, Reinforcement parts
Technical specifications

Leather N°21D

Full-grain leather with vegetable tanning. The leather N°21D is fed at 30%, plunged by hand into a bath of hard fats and getting stronger as time goes on. It is a smooth and firm leather, pleasant to work, able to absorb shocks and to be molded.
  • Thickness - 3-4.5 mm
  • Skin Area - ½ Crop, ½ back, Crop, Neck
  • Use example - Flat belts for textile machines, Vegetable seals and Washers
Technical specifications

Leather N°30

Leather N°30 is a full grain vegetable tanned, result of a selection of the best parts of the skin of beef and bull. The work of the leather N°30 focus on its resilience, which means its bursting strength. Combined with a heddle finish and patina, this leather has a great fastness to rubbing and a wear resistance. Very open, it will react perfectly to maintenance foods. Leather N°30 offers both a heddle and apparent flesh. This leather is used for its friction and bending properties. The stretched N°30 leather is reworked in wet and stretched on a frame. Under the effect of tension, it decreases its elasticity, its elongation and increases the absorption of direct forces without altering its tensile strength.
  • Thickness - 4-4.5 mm
  • Skin Area - ½ crop
  • Use example - Belt, Friction belt and Machinery cleat
Technical specifications